Advertisement
2.
Wall or Pole Mount Installation
Mounting on Wall
Fix the T-formed Bracket to the wall by using wood screws and Gyprock plugs.
Mounting on a Pole between 1.5" to 2" (38.1~50.8mm)
Attach the T-formed Bracket and the W-bar to the pole then use M6x60 bolts, M6 spring
washers and M6 washers to fix the mounting kit onto the pole.
(a)
4
W-bar
(a) The accept pole diameter is
from 1.5" to 2". If the diameter is
larger than 2", it can cause a
failure fast. If diameter is smaller
than 1.5", the clamping force
might be insufficient in holding
the device to the pole.
9
BEC 4700A / 4700AZ (4G/LTE) Wireless Outdoor Router
3
3
1
Wood Screw
M6x60 Screw Bolts
M6 Spring Washer
M6 Washer
3
(b) To minimize bolts
crosstalk, the bolt should
gradually increase the bolt
load on both sides.
2
Wood / Gyprock Plug
2
1
T-formed Bracket
1
1
2
1
1
1
1
1
(b)
Advertisement
