Keyline NINJA LASER Use And Maintenance Manual page 32

2Machine description
2.1.0 Technical features
Dimensions Flat keys side
Width 340 mm
Height 300 mm
Depth (Length) 415 mm
Weight 20 Kg
Power voltage 90-130V 50-60Hz / 220-240V 50-60Hz
Absorption 250W (35W in stand-by)
Asynchronous, 0.18
Motor
Kw
Cutter In Widia ø 63 mm
Cutter speed 1500-3000 rpm
Jaws 4 - side
Movements/Axes 2 stepper motor-operated axes
Automatic gauge
Gauge unlock through the
movement of the axes
7" industrial colour touch screen, 16:10,
User Interface
resolution 800x480 px, VGA
2 USB ports, 2 RS232 serial ports, 1 LAN
Input / Output
port
Mainboard with ARM Cortex A8 CPU, 256
Electronic Equipment MB RAM, NAND 1 GB memory, high
resolution axes control
K ey Re a d i n g /
Electric contact
Decoding System
Input Voltage DC 24V (fed by the key-cutting machine)
Lighting LED - lighted cutting bay
O p e ra t i n g
0°C ÷+ 40°C
temperature
Acoustic pressure
78,5
level Lp (A)dB(A)
4 Keyline S.p.A.
MACHINE DESCRIPTION
2.2.0 Main features
Professional NINJA LASER key cutting machines are electronic
devices able to facilitate the duplication of a variety of keys
Laser keys side
through two different technologies: with variable speed circu-
lar cutter for flat door and car keys and with a fluted end mill
to cut laser and Tibbe keys, coded, with decoding or with bit-
ting.
With NINJA LASER it is possible to use the AC jaw, that combines in
one unique solution one clamping system to cut most of the laser
keys in the market.
The Liger software stands out for its capacity to process every cutting
system and easily receive software updates.
DC electronic motor
The key cutting machine NINJA LASER is used to duplicate the fol-
lowing types of keys:
In Widia ø 2,5 mm
6000 rpm SINGLE BIT KEYS (cylinders for
door)
AC, B, D Jaw (the
Key with rear Key with front
A,C, H jaws are
shoulder shoulder (tip)
available)
Laser-type keys
4 External bit- Double internal
ting
NINJA LASER
DOUBLE BIT KEYS (for car)
Key with rear Key with front
shoulder shoulder (tip)
Double external
4 internal bit-
ting
bitting bitting
Double bitting Simplex keys
Tibbe-Ford keys
flat keys
2.2.1 Machine accessories
• 2 pcs. - All-purpose plates
• 2 pcs. D= 1,2 mm - Pin-shaped shims
• 2 pcs. D= 1,7 mm - Pin-shaped shims
• 1 pc. D= 2 mm - Hexagonal keys
• 1 pc. D= 2,5 mm - Hexagonal keys
• 1 pc. D= 3 mm - Hexagonal keys
• 1 pc. D= 4 mm - Hexagonal keys
• 1 pc. D= 6 mm - Hexagonal keys
• 1 pc. D= 19 - Fork spanner
• 1 pc. - Brush
• 1 pc. - Milling cutter locking rod 1mm
• 1 pc. - Cutter insertion rod
• 1 pc. - laser jaw calibration profile
• 1 pc. - TL100 jaw calibration tracer point
2.3.0 Jaws supplied with the machine for flat keys
The machine is supplied equipped with a swivelling four-sided sym-
metrical jaw, the sides being lacked, as well as orientable on 4 sides
(A, B, C, D).
Man. cod. B409927FG Copyright by Keyline - Italy