1. Manuals
  2. Brands
  3. Keyline Manuals
  4. Disc Duplicator
  5. Locksmith's Utility machine VERSA
  6. User's and maintenance booklet

Keyline Locksmith's Utility machine VERSA User's And Maintenance Booklet

Electronic key duplicating machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's and Maintenance Book for the
"Locksmith's Utility machine
VERSA"
ELECTRONIC
KEY DUPLICATING
MACHINE
Cod.: B405772FG
Version 0.3
Printed September 2011
KEYLINE S.p.A.
Via Camillo Bianchi
31015 Conegliano (TV)
ITALY
Phone: +39.0438.202511
Fax: +39.0438.202520
Website: www.keyline.it
E-mail: versa@bianchi1770.it
For any technical information please write to: versa@bianchi1770.it
Technical support:
E-mail: versa@bianchi1770.it
Phone.: +39.0438.202517

Advertisement

Table of Contents
loading

Related Manuals for Keyline Locksmith's Utility machine VERSA

Summary of Contents for Keyline Locksmith's Utility machine VERSA

  • Page 1 User’s and Maintenance Book for the “Locksmith’s Utility machine VERSA” ELECTRONIC KEY DUPLICATING MACHINE KEYLINE S.p.A. Via Camillo Bianchi 31015 Conegliano (TV) ITALY Phone: +39.0438.202511 Fax: +39.0438.202520 Technical support: Website: www.keyline.it Cod.: B405772FG E-mail: versa@bianchi1770.it Version 0.3 E-mail: versa@bianchi1770.it Printed September 2011 Phone.: +39.0438.202517...
  • Page 2 Copyright of KEYLINE S.p.A. KEYLINE reserves the rights in all countries for the translations, electronic saving, reproduction and partial or total adaptation (including microfilms and Photostats). Creating a booklet is a complex operation and requires numerous controls text, images and the relationships between the two.
  • Page 3 Technical Support: decryptor@bianchi1770.it Terms of the Guarantee Condizioni di Garanzia KEYLINE S.p.A guarantees the good working condition of the KEYLINE S.p.A garantisce al compratore il buon funzionamento della machine for a period of 12 months from the date of purchase and...

  • Page 5: Table Of Contents

    IST OF CONTENTS 0List of contents 5.2.2 Working environment ......... . . 17 5.2.3 Lighting .
  • Page 6 IST OF CONTENTS 9.1.4.3 Bitting modification through new code entry ......63 LOSSARY Key cutting ............64 10.1.0 Key duplication .

  • Page 7: General Information

    This manual describes the features of the machine at the time it was marketed; therefore it may not capture later technological improvements introduced by KEYLINE S.p.A. as part of its constant endeavor to enhance the performance, ergonomics, safety and functionality of its...

  • Page 8: Graphic Symbols

    Indicates prohibited operations. 1.1.0 ACHINE DATA PLATE ’ ISTRIBUTOR S ADDRESS KEYLINE S.p.A. Via Camillo Bianchi 31015 Conegliano (TV) - ITALY Tel.: +39.0438.202511 Fax: +39.0438.202520 Internet: www.keyline.it E-mail: versa@bianchi1770.it Key duplicating machine “VERSA”...

  • Page 9: Working Conditions

    To facilitate communication please state: Any other operation (special maintenance, repairs, replacements etc..) shall be carried out by qualified personnel or contractors. KEYLINE • the name of the customer; S.p.A. is available for this assistance.

  • Page 10: Safety Instructions

    AFETY INSTRUCTIONS 2Safety instructions 2.1.0 AFETY LEGISLATION The key duplicating machine and its safety devices comply with Council Directive 2006/42/EEC known as “Machine Directive“. This manual lists all safety instructions that the operator must follow during the installation and functioning of the machine. Failing to respect the instructions may compromise the safety conditions envisioned during design and testing phases.

  • Page 11: Protection Devices

    AFETY INSTRUCTIONS 2.1.2 2.1.3 ROTECTION DEVICES ERSONAL PROTECTIVE EQUIPMENT Ground Connection (A). When operating and maintaining the key cutting machine users must Protective eye guard (B) wear the following personal protective equipment: Emergency Button (C) • Protective clothing: Maintainers and key cutting machine operators must wear protective clothing that complies with the basic safety requirements currently in force.

  • Page 12: Residual Risks

    AFETY INSTRUCTIONS 2.2.0 ESIDUAL RISKS IGURE OCATION OF RESIDUAL RISKS The machine has been designed with extreme care to make it safe throughout production, transport, adjustment and maintenance operations. Nevertheless, not all risks for either operators or the environment could be eliminated, be it for technological reasons (material reliability) or management-related issues (overcomplicated operations).

  • Page 13: Machine Description

    ACHINE DESCRIPTION 3Machine description 3.1.0 AIN FEATURES Professional VERSA key cutting machines are electronic devices able to facilitate the duplication of a variety of keys that require the use of fixed adaptors. The VERSA has an aluminum body that reduces vibration while guaranteeing noiseless operation and a longer cutter life.

  • Page 14: Parts- Machine

    ACHINE DESCRIPTION 3.2.0 ARTS ACHINE ON/OFF switch Emergency button Touch-screen panel Protective eye guard Milling cutter Jaw locking knob Jaw blocking nut (allen screw) Swarf tray 10. Tracer tower 11. Tracers 12. Jaw support carriage 13. Tip stop VERSA K .
  • Page 15 ACHINE DESCRIPTION 14. Power plug 15. Fuses holder 16. Fans 17. Monitor connecting port 18. USB connecting port 19. Ethernet connecting ports 20. Serial connecting port VERSA K . B405772FG - C - 2011 - I NGLISH UPLICATING ACHINE OPYRIGHT BY EYLINE TALY...

  • Page 16: Machine Accessories

    ACHINE DESCRIPTION 3.3.0 ACHINE ACCESSORIES VERSA K IGURE IT OF ACCESSORIES The key cutting machine is supplied with a kit of accessories and tools (shown in figure 4) used for adjusting, operating and maintaining the machine: T - Handle hexagon wrench 4mm Brush Wrench key...

  • Page 17: Jaws And Adaptors Supplied With The Machine

    ACHINE DESCRIPTION 3.4.0 AWS AND ADAPTORS SUPPLIED WITH THE MACHINE VERSA K . B405772FG - C - 2011 - I NGLISH UPLICATING ACHINE OPYRIGHT BY EYLINE TALY...

  • Page 18: Technical Features

    ACHINE DESCRIPTION 3.5.0 ECHNICAL FEATURES VERSA IMENSIONS Width 500 mm Height 400 mm Depth (Length) 430 mm Weight 50 Kg VERSA ECHNICAL FEATURES Power voltage 230V~50Hz/110V~60Hz Absorption 1000 W Motor Brushless 3000 rpm • Motor capacity 400 W Type of cutter Ing carbide Operating temperature ÷...

  • Page 19: Packing, Transport And Installation

    ACKING TRANSPORT AND INSTALLATION 4Packing, transport and installation 4.1.0 ACKAGING Prior to transport, the machine and its component parts are packed in a cardboard box and fixed in it with shaped cardboard in order to ensure a safe and damage-free handling of the machine. The dimensions of the carton are shown below.

  • Page 20: Transport

    Notify KEYLINE S.p.A. immediately and wait for the relevant which shall be carried out by qualified and skilled instructions.

  • Page 21: Installation

    NSTALLATION 5Installation 5.1.0 ENERAL NSTRUCTIONS 5.1.1 HARACTERISTICS OF THE PLACE OF INSTALLATION The key cutting machine must be placed on a smooth level bench about 90 - 110 cm (35 - 43 Inches) high, suitable for bearing the weight of the machine and keep it horizontal, thus avoiding vibrations and stress.

  • Page 22: Lighting

    NSTALLATION 5.3.0 ONNECTIONS Warning: 5.3.1 ROUNDING Key cutting machines VERSA have been designed in compliance with If the machine is used in places exposed to corrosion, maintenance shall be scheduled in such a way as to prevent the safety legislation in force and feature appropriate safety devices to extreme wear of the components.

  • Page 23: Start Up

    TART UP 6Start up 6.1.0 OTICE FOR MACHINE USE A series of operations are illustrated below, which users must perform in order for the machine to function under optimum conditions and in complete safety at all times. • Keep the power cable away from sources of heat, humidity, oil, water and sharp objects;...

  • Page 24: Operating Procedure

    • K to access the menu that allows to search the key to be cut into the displayed. EY BLANK Keyline keys list • C to access the menu that allows to decode the sample by code • # R...

  • Page 25: Settings: Machine Data

    ETTINGS ACHINE 7Settings: Machine Data This section contains a description of the procedures required to set the parameters for utilization of the duplicating machine and instructions on how to consult and manage machine data. ETTINGS ACHINE VERSA K . B405772FG - C - 2011 - I NGLISH UPLICATING...

  • Page 26: Main Menu

    ETTINGS ACHINE 7.1.0 AIN MENU From the main Menu it is possible to access the Setup Menu of key duplicating machine management, control and use. PTIONS DISPLAYED • J to access the menu that allows to select the jaw to be adjusted •...

  • Page 27: Jaw Setup

    ETTINGS ACHINE 7.2.0 This operation must be carried out after a new jaw will be used to AW SETUP replace an existing one or whenever a new jaw is installed on the machine before using it. This function permits to start the automatic jaw adjustment.
  • Page 28 ETTINGS ACHINE • press the “AUTOADJUST.” button to start the jaw setting procedure. • a window appears: the pin (B) removal, the tracer T00 insertion and the tip stop/ removal are requested; • insert the tracer as indicated in paragraph 7.3.1. on page 27 “Tracers set up”; •...

  • Page 29: Tracers Setup

    ETTINGS ACHINE 7.3.0 RACERS SETUP This operation must be carried out after a tracer point is replaced. This function permits to start the automatic tracer points adjustment. OW TO ACCESS THE SCREEN • From the “SETUP” page by selecting the “TRACERS” key. DJUSTMENT PROCEDURE •...
  • Page 30 ETTINGS ACHINE • Select the relevant icon on the display (on the top right) to choose one of two tracers; • the parameters set for selected tracer point appear into the “ACTUAL” field; • it is possible to modify the axes (X_Y_Z) by means of the relevant buttons ( + or - ). The new value will appear into the “NEW”...

  • Page 31: How To Replace The Tools In The Spindle

    ETTINGS ACHINE 7.3.1 OW TO REPLACE THE TOOLS IN THE SPINDLE • Open the lateral panel placed on the left part of machine; • Keep pressing the "C" button, press and turn counterclockwise the "M" handle to loosen the chuck spindle "B"; •...

  • Page 32: Test Setup

    ETTINGS ACHINE 7.4.0 EST SETUP The TEST menu permits to check the functioning status of machine main parts. In case of a device anomaly, you may be request from our Technical personnel to access this menu to diagnose the anomaly. PTIONS •...

  • Page 33: Update Via Usb

    The update through USB flash drive is one of the machine's optional functions, as it requires a dedicated update package for the specific machine and for special needs. Such a package can only be created by KeyLine. VERSA K . B405772FG - C...

  • Page 34: Update Via Versa Programme

    "Keyonline" service. Note: The WEB update is possible only if the machine was previously registered for the Keyonline service. Contact KeyLine for registration. • USB: to proceed with the software and database update, taking the data from a USB flash drive.

  • Page 35: Web

    Note: In this case, it is essential for the Versa machine to be connected to the internet through a modem (or corporate network). Contact your network administrator or the KeyLine Service centre to solve any problems. • VIA PC: the update package is downloaded through a normal PC connected to the internet and saved on a USB flash drive, so as to be able to install it later on in the Versa machine.

  • Page 36: Direct

    In such cases, please check that all the preliminary operations have been concluded and that all the network parameters are configured correctly. For further help, please contact the KeyLine Service Centre. At the end of the download a message confirms that the data have been received and can now be installed.

  • Page 37: Via Pc

    • In a few minutes a message appears: Remove the usb device and connect it to the PC. • using the browser, connect to the following web page: http://keyonline.keyline.it/ • Select the "BROWSE" button to access the file selection dialogue box. VERSA K .
  • Page 38 ETTINGS ACHINE • Search and select the .csk file previously saved in the flash drive, then press • A message that indicates to wait a few minutes appears on the screen. "OPEN". • Press "OK" to start downloading the file and when the browser asks where to save it, choose the USB flash drive.
  • Page 39 In these cases, check that you have used the same USB flash drive that you connected to the machine at the beginning of the update process. Contact the KeyLine Service Centre to solve any problems. • At the end of this operation, select “SETUP” and later “UPDATE” from the main menu;...

  • Page 40: Setting

    ETTINGS ACHINE 7.7.0 The “SETTING” menu permits to display and modify some information fields ETTING of machine and management software. It has a tree structure. PTIONS DISPLAYED • S YSTEM • Serial Number: displays the machine serial number • Key cut: displays the number of keys cut by the machine •...
  • Page 41 Warning: modifications not-needed or wrong could compromise the machine good functioning. If you have any doubt, please contact KeyLine service department. ROCEDURE • Use the “OPEN/CLOSE” key to accede and go out from editable fields (*). New data entering is permitted by means of the overprinted keyboard.

  • Page 42: Touch

    ETTINGS ACHINE 7.8.0 OUCH The “TOUCH” menu permits to adjust the Touch Screen visualization. OW TO ACCESS THE SCREEN • From the “SETUP” page by selecting the “TOUCH” key. ROCEDURE • use the point of a pencil to gently select the centre of the cross that appears on the left bottom of the display.

  • Page 43: Key Search

    EARCH 8Key Search EARCH VERSA K . B405772FG - C - 2011 - I NGLISH UPLICATING ACHINE OPYRIGHT BY EYLINE TALY...

  • Page 44: Cylinder Brand Menu

    EARCH 8.1.0 YLINDER BRAND MENU The “BRAND” menu permits to search and cut a key, through the list of the cylinder brands into the database. OW TO ACCESS THE SCREEN • From the “MAIN MENU” page by selecting the “BRAND” key. ROCEDURE •...
  • Page 45 EARCH • a page is displayed with the key features (Cylinder, Blank, Card) and the description of the lock system (e.g. Cisa Astral 2 Axes 6+7 Pins); • if displayed key is correct press the NEXT key to accede to the OPERATING MENU Note: Use of OPERATING MENU is described in chapter 9 page 47.

  • Page 46: Car Brand Menu

    EARCH 8.2.0 AR BRAND MENU The “CAR BRAND” menu permits to search and cut a key, through the list of the car brands into the database. OW TO ACCESS THE SCREEN • From the “MAIN MENU” page by selecting the “CAR BRAND” key. ROCEDURE •...
  • Page 47 EARCH • a page is displayed with the key features (Car brand, Model year, Record Number, Card) and the list of available Blank; • select the interested Blank (e.g. VX4) and press the NEXT key to accede to the OPERATING MENU. Note: Use of OPERATING MENU is described in chapter 9 page 47.

  • Page 48: Key Blank Menu

    EY BLANK MENU The “KEY BLANK” menu permits to search and cut a key, through the list of the Keyline keys into the database. OW TO ACCESS THE SCREEN • From the “MAIN MENU” page by selecting the “KEY BLANK” key.

  • Page 49: Code Menu

    EARCH 8.4.0 ODE MENU The “CODE” menu permits to search the type of key to be cut by entering the code of the key. OW TO ACCESS THE SCREEN • From the “MAIN MENU” page by selecting the “CODE” key. ROCEDURE •...

  • Page 50: Record Number Menu

    EARCH 8.5.0 ECORD UMBER MENU The “RECORD NUMBER” page permits to search the type of key to be cut by entering the system number of the key. OW TO ACCESS THE SCREEN • From the “MAIN MENU” page by selecting the “# RECORD” key. ROCEDURE •...

  • Page 51: Operating Menu

    PERATING 9Operating Menu PERATING VERSA K . B405772FG - C - 2011 - I NGLISH UPLICATING ACHINE OPYRIGHT BY EYLINE TALY...

  • Page 52: Operating Menu

    PERATING 9.1.0 PERATING MENU The OPERATING MENU permits to modify the key cutting settings and to customize some keys characteristics according to specific needs. PERATING MENU OPTIONS NGRAVING permits to select the head shape as a background, where to fit a text, a logo, a counter and a serial number ECODING permits to start the key reading process...

  • Page 53: Engraving

    PERATING 9.1.1 NGRAVING The “ENGRAVING” menu permits to change and set some key features before starting the key cut. OW TO ACCESS THE SCREEN • From the “OPERATING MENU” page by selecting the “ENGRAVING” key. ROCEDURE • select the reference (e.g. KS2) of the shape of head to be engraved from the list displayed by the video;...

  • Page 54: Insert Menu - Text

    PERATING 9.1.1.1 When the head has been selected it is possible to personalize it by NSERT MENU means of the INSERT MENU. The following functions are displayed into the INSERT menu: TEXT LOGO COUNTER KEY CODE This paragraph describes the text insertion procedure. OW TO ACCESS THE SCREEN •...
  • Page 55 PERATING EYBOARD FUNCTIONS • the alphanumeric keyboard is composed by: alphanumeric keys: to enter the text input field: displays the entered text arrow key: to cancel one letter at a time SPC key: to enter one or more spaces between two words flag key: to enter special types (available with the futher updates).

  • Page 56: Insert Menu - Logo

    PERATING 9.1.1.2 NSERT MENU This function permits to import a logo to be engraved on the key head. OW TO ACCESS THE SCREEN • From the “MODEL” page press the “INSERT” key and then “LOGO”. • From any of TEXT, COUNTER or KEY CODE pages press the “INSERT” key, select “LOGO”...
  • Page 57 PERATING ENU OPTIONS the ROTATION permits to rotate the logo the DIRECTION ARROWS permits to move objects. X and Y position fields indicate the value the SIZE ARROWS pressed one per time, increase the width and height of objects, pressed continously they reduce them. Dimensions are indicated into the relevant fields the CHAIN key permits to select and group two or more objects to modify them, move them or dimension them at the same time...

  • Page 58: Insert Menu - Counter

    PERATING 9.1.1.3 NSERT MENU OUNTER This function permits to insert on the head an automatic counter of the number of produced keys. OW TO ACCESS THE SCREEN • From the “MODEL” page press the “INSERT” key and then “COUNTER” • From any of TEXT, COUNTER or KEY CODE pages press the “INSERT” key, select “COUNTER”...
  • Page 59 PERATING ENU OPTIONS the FONT field permits to change the font the ROTATION field permits the text rotation at intervals of 90° degrees the DIRECTION ARROWS permits to move objects. X and Y position fields indicate the value the SIZE ARROWS pressed one per time, increase the width and height of objects.

  • Page 60: Insert Menu - Key Code

    PERATING 9.1.1.4 NSERT MENU EY CODE This function permits to insert on the head, an identification code of produced key. OW TO ACCESS THE SCREEN • From the “MODEL” page press the “INSERT” key and then “KEY CODE” • From any of TEXT, COUNTER or KEY CODE pages press the “INSERT” key, select “KEY CODE”...
  • Page 61 PERATING ENU OPTIONS the FONT field permits to change the font the ROTATION permits to rotate the text the DIRECTION ARROWS permits to move objects. X and Y position fields indicate the value the SIZE ARROWS pressed one per time, increase the width and height of objects.

  • Page 62: Engraving

    PERATING 9.1.2 NGRAVING ROCEDURE • Created head and jaw installation indications are displayed on “Engraving” page; Note: press the HELP key to display the jaw to be installed and instructions for key correct positioning. Warning: Key must be inserted into jaw C1 with the head toward the rear of machine.

  • Page 63: Decoding

    PERATING 9.1.3 By means of the “DECODING” menu it is possible to start the reading ECODING procedure of a key to be reproduced on a key blank. OW TO ACCESS THE SCREEN • From the “OPERATING MENU” page by selecting the “DECODING” key. ROCEDURE •...

  • Page 64: Ins. Code

    PERATING 9.1.4 By means of the “INS. CODE” menu it is possible to modify the features of key to be cut according to a code entered into a current table. OW TO ACCESS THE SCREEN • From the “OPERATING MENU” page by selecting the “INS. CODE” key. ROCEDURE •...

  • Page 65: Manual Bitting Modification

    PERATING 9.1.4.1 ANUAL BITTING MODIFICATION By means of the “MODIFY” menu it is possible to modify the bitting decoded by the system without respecting the current dimensions. The modifications will be made on the key blank at the cut moment. OW TO ACCESS THE SCREEN •...

  • Page 66: Bitting Modification Through Code Search

    PERATING 9.1.4.2 ITTING MODIFICATION THROUGH CODE SEARCH By means of the “CODE SEEKER” menu the system carries out a search according to a bitting entered into a current table. The changed bitting will be reproduced on the key blank at the cut moment. OW TO ACCESS THE SCREEN •...

  • Page 67: Bitting Modification Through New Code Entry

    PERATING 9.1.4.3 ITTING MODIFICATION THROUGH NEW CODE ENTRY By means of the “INS. DEPTH” menu it is possible to insert or modify the bitting decoded by the system according to a code set by the user. Changed bitting will be reproduced on the key blank at the cut moment. OW TO ACCESS THE SCREEN •...

  • Page 68: Key Cutting

    EY CUTTING 10Key cutting EY CUTTING VERSA K . B405772FG - C - 2011 - I UPLICATING ACHINE OPYRIGHT BY EYLINE TALY NGLISH...

  • Page 69: Key Duplication

    EY CUTTING 10.1.0 On the “CUTTING” page it is possible to start the cutting procedure of EY DUPLICATION selected key. OW TO ACCESS THE SCREEN • From any “CARD” page by pressing the “NEXT” key. ROCEDURE • when the “CUTTING” page is opened follow the instructions displayed into the information field;...

  • Page 70: Maintenance

    The machine operator must be knowledgeable about machine operation. KEYLINE S. ERSONNEL AUTHORIZED BY Personnel from KEYLINE S.p.A. Technical Support Service or else officially authorized by KEYLINE S.p.A. Technical Support Service. VERSA K . B405772FG - C - 2011 - I...

  • Page 71: Type Of Maintenance

    (break downs, failures, replacement of parts ). Due to the complex nature of such actions and the special tools required, we recommend you should contact qualified personnel from or authorized by KEYLINE S.p.A.. VERSA K . B405772FG - C...

  • Page 72: Complex Maintenance

    AINTENANCE 11.3.0 OMPLEX AINTENANCE 11.3.1 EPLACING THE TRACERS PARE PART DESCRIPTION REQUENCY Conical Tracer Versa RIC05352B When required Conical Tracer Versa RIC05348B When required EQUIRED TOOLS • 1 mm hexagon wrench AFETY WARNING Before carrying out this operation press the main switch to turn OFF the power and disconnect the power cable from the mains.

  • Page 73: Replacing The Touch Screen

    AINTENANCE 11.3.2 • Remove 2 screws (B) from the wiring fixing stripe. EPLACING THE OUCH CREEN PARE PART DESCRIPTION REQUENCY MONITOR RIC07642B When required EQUIRED TOOLS • No tool is required AFETY WARNING Before carrying out this operation press the main switch to turn OFF the power and disconnect the power cable from the mains.

  • Page 74: Dhcp Setup

    AINTENANCE 11.3.3 DHCP S ETUP In order for the duplicator to be connected to an existing network (through a router), it shall be necessary to assign an automatic internal IP address to the machine, by setting the DHCP. OW TO ACCESS THE SCREEN •...

  • Page 75: Replacing The Compact Flash

    PARE PART DESCRIPTION REQUENCY COMPACT FLASH RIC07519B When required MPORTANT • To get the compact flash as a spare part, send to KeyLine the serial nr. of the machine and MAC-ADDRESS. EQUIRED TOOLS • Torx Screwdriver AFETY WARNING Before carrying out this operation press the main switch to turn OFF the power and disconnect the power cable from the mains.

  • Page 76: Inspecting And Replacing The Fuses

    AINTENANCE 11.3.5 NSPECTING AND REPLACING THE FUSES PARE PART DESCRIPTION REQUENCY Slow fuse 6,3 A 5x20 RIC02990B When required The VERSA key duplicating machine is equipped with 2 fuses located in the power unit next to the switch, which have the purpose to protect the machine from surges and short circuit.

  • Page 77: Cleaning The Machine

    AINTENANCE 11.4.0 LEANING THE MACHINE At the end of each working day clean the machine removing scrap and burrs to ensure proper functioning of the machine and to prevent any damage to its parts. The VERSA key duplicating machine is equipped with a container to collect scrap and burrs generated during key cutting operations.

  • Page 78: Dismantling And Disposal

    ISMANTLING AND DISPOSAL 12Dismantling and disposal 12.0.1 ASTE DISPOSAL The disposal of waste generated by the machine shall be managed in compliance with the legislation in force in the user's country. In Europe, machine shop rejections are classified as special waste and are assimilated to metal wool when it comes to managing municipal solid waste (MSW).

  • Page 79: The Weee Directive

    WEEE category (Waste Electrical and Electronic Equipment). KEYLINE S.p.A. has always taken great care to protect the environment and complies with the legislative decree on WEEE that has been in force since 13/08/2005. As a consequence, in accordance with...
  • Page 80 ISMANTLING AND DISPOSAL VERSA K . B405772FG - C - 2011 - I UPLICATING ACHINE OPYRIGHT BY EYLINE TALY NGLISH...

Table of Contents