Beko METPOINT BDL Instructions For Installation And Operation Manual page 81

METPOINT® BDL
Selection and entry of the operands and opera-
tions see Chapter 12.2.6.4.2
12.2.6.4.3.
The result for V1b is the sum of consumption
sensors A4 + B1, see result zone. In this exam-
ple 37233,4 m³
Selection and entry of the operands and opera-
tions see Chapter 12.2.6.4.2
12.2.6.4.3.
The result for V1c is the sum of consumption
sensors V1a + V1b, see result zone. In this
example 66090,2 m³
Alternatively, a total sum could already be es-
tablished in V1b, using the third operand in
V1b = A4 + B1 +V1a -> not displayed
As a complementation, the sum of the con-
sumed energy is optionally shown here in
Read from the electric meter at input B2.
V1c  total compressed-air consumption
V1d  Power consumption
Here, the calculation of the
is implemented with
V1e = B2 / V1c with 0.072 KWh/m³ as the result.
The calculation of the costs is effectuated with
V1f = B2 * 0.21 with 991.36 € as the result.
Since more than four values are used in this
virtual channel, the display must be split.
Change between the pages with the
ton.
Operation BDL
and Chapter
and Chapter
V1b
V1d.
specific performance
page but-
81