14.2.2.2 Denoting the measuring data and determining the resolution of the decimal places
Note:
The
resolution
of the decimal places,
Tool button:
Main menu Settings Sensor settings A1 Tool button
See Chapter
12.2.2.7 Marking and setting text fields
Important:
In the menu items
Main menu Settings Sensor settings
value name
is only indicated on the BDL standard version with four channels!
The
short name
is only used in these two menu items, for the BDL version with one or two
extension boards (eight or 12 channels).
14.2.2.3 Recording measuring data
Main menu Settings Sensor settings A1 Recording button
Caution:
Prior to recording the selected measuring data, the data logger must be activated subsequent to the
completion of the settings
METPOINT® BDL
short name
and
(see Chapter 12.2.3 Logger settings (data
value name
can be found below the
For the
value
to be recorded, a
10 characters can be entered in order to
simplify its identification at a later moment in
the
menu
items
Graphics/current
values.
Otherwise, the designation would be A1a,
for example.
A1
is the channel name and
measured value in the channel, while
would be the second, and
The
resolution
of the decimal places is easi-
ly adjustable by pressing right and left (0 to
5 decimal places).
and
Main menu Current values,
With the
recording
buttons, the measuring
data are selected which will be stored at an
activated data logger.
logger).
Operation BDL
tool
button!
name
with
Graphics
and
a
is
the first
b
c
the third.
the
41