Beko METPOINT BDL Instructions For Installation And Operation Manual page 47

Main menu  Settings  Sensor settings  A1  Text field type
See also Chapter 12.2.2.8 Configuration of analog sensors
Main menu  Settings  Sensor settings  A1  Text field unit
Main menu  Settings  Sensor settings  A1  Text field diameter
Important:
The inner diameter should be entered as exactly as possible, since, otherwise, the measuring results
will be falsified!
No uniform standard exists for the inner diameter of the pipe!
(Please ask the manufacturer or, if possible, check the measurements yourself!)
METPOINT® BDL
After having pressed the
following options can be selected.
(see illustration)
A preset selection
units.
Important:
Here, the inner diameter
can be entered in the event that it was
not automatically correctly set.
Here, 27.5 mm, for example, are entered for
the inner diameter.
Operation BDL
type text field, the
of suitable
of the flow pipe
47