Operation Bdl; Main Menu (Home); Initialisation - Beko METPOINT BDL Instructions For Installation And Operation Manual

14 Operation BDL

The operation is self-explanatory to the largest possible extent and is menu-driven via the touch panel.
The selection of the respective menu items is realised via short "tapping" with the finger or using a soft-
pointed pen.
Caution: Please do not use pens or other objects with sharp edges!
The foil may be damaged!
After the connection of the sensors, the latter also need to be configured.
Entries or changes can be made in all the fields with a white background.
The measured values can be displayed as a curve or as values.
Words in green letters mainly point to the illustration(s) in the chapter section but also related important
menu paths or menu items are also marked in
The menu navigation is generally shown in
The table of contents and the chapter references in
ers.

14.1 Main menu (home)

You can go to every available sub item via the main menu.

14.1.1 Initialisation

Please select the suitable configurations in Chapter
METPOINT® BDL
green letters.
green letters!
blue letters contain links to the respective chapter head-
Subsequent to the switching-on of the BDL,
all channels are initialized and the
main menu appears.
Caution:
At the first start-up, channels may not be
preset.
12.2.2 Sensor settings
Operation BDL
and set them!
35