Operation BDL
14.2.3.3 Modbus settings for the METPOINT
When connecting the METPOINT
First step: select a free sensor channel
Main menu Settings Sensor settings Select a free channel (example: channel A1)
Second step: select Modbus type
Main menu Settings Sensor settings A1 Type text field Select Modbus and confirm with
>OK<.
Third step: define a name
Main menu Settings Sensor settings A1 Name text field
Now, a name needs to be entered.
Fourth step: define the Modbus settings
Main menu Settings Sensor settings A1 Modbus settings
Note:
Further information regarding "Marking and setting text fields" can be found in Chapter Fehler!
Verweisquelle konnte nicht gefunden werden..
58
®
SD23
SD23 via Modbus, the following settings are required:
®
The corresponding Modbus ID can be taken
from the data sheet of the sensor (here, for
example 1).
Adjust the other parameters according to the
illustration.
METPOINT® BDL