Resolution Of The Decimal Places - Designating And Recording Data Values - Beko METPOINT BDL Instructions For Installation And Operation Manual
Graphic display-recorder
Hide thumbs
Also See for METPOINT BDL:
Table of Contents
Advertisement
14.2.7.5 Resolution of the decimal places – designating and recording data values
Main menu Settings Sensor settings Virtual channels V1 Tool button
Main menu Settings Sensor settings Virtual channels V1 Recording button
Caution:
Prior to recording the selected measuring data, the data logger must be activated subsequent to the comple-
tion of the settings
(see Chapter 12.2.3 Logger settings (data
See also Chapter
12.2.2.2
METPOINT® BDL
Denoting the measuring data
The
resolution
of the decimal places,
name
and
value name
can be found below the
tool button
With the
recording
button, the data are select-
ed which are stored at an activated data log-
ger.
For the
value
to be recorded, a
characters can be entered in order to simplify
its identification at a later moment in the menu
items
Graphics
and
Graphics/current
Otherwise, the designation would be V1a, for
example.
V1
is the channel name and
ured value in the channel,
ond, and
c
the third.
The
resolution
of the decimal places is easily
adjustable by pressing right and left (0 to 5
decimal places).
With the
recording
buttons, the measuring data
are selected which are stored at an activated
data logger.
logger).
and
12.2.2.3 Recording measuring data
Operation BDL
short
name
with 10
values.
a
the first meas-
b
would be the sec-
79
Advertisement
Table of Contents
