Example Calculation "Specific Performance - Beko METPOINT BDL Instructions For Installation And Operation Manual

Operation BDL

14.2.7.6 Example calculation "specific performance"

As an example, a compressor plant with five compressors is taken as the basis.
Consumption measurement in each case with an FS109 consumption probe at inputs A1 - A4 & B1,
and an electric meter at input B2.
The total consumption of air and energy, and the "specific performance" of the entire plant are calculated.
Main menu  Settings  Sensor settings  Virtual channels  V1 V1a Use
80
Selection and entry of the operands and opera-
tions see Chapter 12.2.6.4.2
12.2.6.4.3.
The result for V1a is the sum of consumption
sensors A1 + A2 + A3, see result zone. In this
example, it is 28856,8 m³.
and Chapter
METPOINT® BDL