Analog 2-Wire, 3-Wire, And 4-Wire Current Signal - Beko METPOINT BDL Instructions For Installation And Operation Manual

Connection of the sensors

11.5 Analog 2-wire, 3-wire, and 4-wire current signal

Sensors with a 4 - 20 mA output in 2-wire technology
26
e.g. SP11/21/61
BDL with an external transmission
For the transmission of the 4 - 20 mA current signal to
an external display, PLC, or central control system, please
use support pin 9 (ext. display)
The electric circuit must be closed in any case.
(e.g. pressure sensors 1.6/16/40/100/250/400 bar or tem-
perature sensors with 4 – 20 mA)
OCV with an analog output
METPOINT® BDL