Setting The Clock; Setting The Minute Minder - CDA VK703 Use And Maintenance

Setting the clock

• In standby mode, press and hold the timer sensor
minutes of the display flash.
• Use and
confirm the setting.
• The hours of the display will now be flashing. Use
set the hours. Touch the
Note: The clock can only be set in 24 hour format

Setting the minute minder

Select a function and touch the
indicator
desired time. Touch the
seconds and the setting will save automatically and the
will be illuminated on the display.
The minute minder can be set between 1 minute and 24 hours.
Once the duration time has elapsed you will hear beeping and the
display will flash 0:00. Touch the
and return to standby mode. If no sensor is pressed, the beeping
will stop after 60 seconds but the display will continue to flash.
10 | Instruction Manual
to set the minutes. Touch the
flashes. Then, use the
sensor to confirm the setting.
sensor until the minute minder
and
sensor to confirm the setting or wait 5
sensor to mute the beeping
until the
sensor to
and
sensors to set the
to
indicator