Filling The Water Tank - CDA VK703 Use And Maintenance

Filling the water tank

Before using the steam functions for the first time we recommend
that you remove and clean, thoroughly, the water tank in the
appliance. The water tank can be found on the right hand side of
the appliance when the door is open (circled below).
Fig. 1
Fill the tank up to the maximum capacity line and carefully re-insert
the tank. The appliance will warn you when the system is out of
water by displaying 'Lo' on the timer section of the display.
If you are leaving the appliance and/or the steam functions to go
unused for some time (i.e. whilst on holiday) we recommend
emptying and drying the water tank so as to prevent the water from
stagnating.
Instruction Manual | 7