Table of Contents
Advertisement
Automatic cooking
This function allows for a delay to be set for cooking and an
automatic end time. For example, if you set the cooking duration
to 1 hour, and the end time to 15:00, then the oven will activate the
function at 14:00.
To switch on automatic cooking
•
First select a heating function and the temperature required
•
Press the
display
•
Use the
•
Press the
display and the end time will also be shown
•
Use the
to confirm the setting
•
To clear the duration setting, either cycle down the minutes
using the
touch the
you can begin the function again.
During the cooking process the
Once the duration time has elapsed you will hear beeping and the
display will flash 0:00. Touch the
and return to standby mode. If no sensor is pressed, the beeping
will stop after 60 seconds but the display will continue to flash.
16 | Instruction Manual
sensor twice and the
and
sensors to adjust the duration as needed.
sensor again and the
and
sensors to adjust the end time and touch
and
sensors until the display shows 0:00 or
sensor and you will return to standby mode and
indicator will flash on the
indicator will flash on the
indicator will be illuminated.
sensor to mute the beeping
Advertisement
Table of Contents
