Setting The Clock; Using The Timer - CDA DV 980 Series Installation And Use Manual

Double ovens
Hide thumbs Also See for DV 980 Series:
Table of Contents

Advertisement

"Touch-Control" Keys
The "touch-control" keys should be operated by the fingers (just by touching the key). When using touch controls
it is best to use the ball of your finger rather than the tip.
The keys are automatically deactivated:
– 8 seconds after the last selection; the deactivation is indicated by an acoustic signal ("beep").
To reactivate just touch the "

Setting the Clock

When first connected, or after a power failure, the digits and "AUTO" will show on the display. To set the clock,
touch the "
" key, for more than 2 seconds, and then the "
Important: The oven does not operate, in manual cooking, without first having set the clock.
To set the clock, with the appliance already connected, touch the "
than 2 seconds), then "
Important: - changing the time will delete any automatic program;
– after setting the clock, the oven starts to operate in the selected function (manual cooking). The "
" symbol is steady illuminated.

Using the Timer

You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven off.
The timer can be set for up to 23 hours and 59 minutes.
– To set the timer, touch the "
" keys.
– After about 8 seconds an acoustic signal ("beep") will sound confirming the regulation (" " symbol steady
illuminated).
– To check the remaining time touch the "
a minute the display will show hours and minutes; if less than a minute the display will show seconds.
– When the time is up, the timer will beep. Touch the "
the "
" or "
" key to stop the beep and than the "
" symbol flashing on the display.
– Turn off the oven manually (function and thermostat knobs in the off position) if the manual cooking has been
completed.
Setting the Timer Volume
You can select from three volume levels.
– Touch the "
" and "
– Touch the "
" key; you can read on the display the current timer volume ("ton1", "ton2" or "ton3").
– Touch the "
" key to listen or change the timer volume.
– Timer volume activated: the last displayed.
– After about 8 seconds an acoustic signal ("beep") will sound confirming the volume setting; then the time of
day will be displayed.
" key or the "
" or "
" keys.
" key for more than 2 seconds (the " " symbol flashes), then the "
" key for more than 2 seconds. If the remaining time is more than
" keys simultaneously for more than 2 seconds.
" and "
" keys.
" or "
" keys.
" and "
" key , for more then 2 seconds, to turn it off; or press
" key, for more than 2 seconds, to deactivate the "
" keys simultaneously (for more
" or "
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dk950Dvt 980 series

Table of Contents