Table of Contents
Advertisement
Important
Do not use any other tool, except for a screwdriver, to remove the
protective cover as this may damage the lamp assembly or the
oven.
Removing the appliance door
In order to allow for easier access into the oven cavity for cleaning,
it is possible to remove the door. Before removing the door,
ensure that you have an area prepared in which you can place the
removed door. This area should ideally be protected by something
like a folded, dirt-free, towel to help prevent damage to surfaces
and the door.
•
Open the door fully
•
Lift and tilt the safety catch part of the hinge (Fig .3) so that it is
fully extended and points towards the door.
•
Close the door most of the way, lift it slightly and then pull it,
safely but firmly, towards you
Fig. 3
18 | Instruction Manual
Fig. 4
Advertisement
Table of Contents
