CDA VK703 Use And Maintenance page 19

Replacing the appliance door
• Hold the door to the appliance in the closed position and
manoeuvre the hinges so that the part of the hinge, highlighted
by the star in Fig. 4, inserts into the hinge slot in the cavity
frame.
• Next, ensure the notch on the underside of the hinge sits on
the lip of the hinge slot. Open
the door fully. Each hinge should
be seated in the same way as
the hinge in Fig. 5. If it is not,
follow the steps for removing the
door and try replacing it again.
• Finally, lift the safety catch part
of the hinges back into place so
that they are lying flat against
the hinges.
Please note: If the hinge safety catches are not in the correct
place then the door and/or appliance may receive damage when
attempting to close the door.
Fig. 5
Instruction Manual | 19