Setting The Clock; Programming Oven - CDA DC740 Manual For Installation

Programming the
Oven
Please note:
• The semi-automatic and automatic
cooking programmes will only work
with the main oven.
• The alert beep will cut off after
two minutes if it is not switched off
manually.

Setting the clock

The clock is preset to 12:00, and will
revert to this after a power failure.
When the current time indicator is
flashing, touch
correct time is shown on the display,
the clock will set after approximately
five seconds' delay.
To change the clock once it has been
set, touch repeatedly until the current
time indicator flashes, then touch
or . When the correct time is shown
on the display, the clock will set after
approximately five seconds' delay.
or . When the
1
2
5 6
1 Cooking time indicator
2 End of cooking time indicator
3 Minute minder indicator
4 Current time indicator
5 Decrease key
6 Mode key
7 Increase key
fig. 1
3
4
7
9