Data Logger Function - Lutron Electronics DW-6195 Operation Manual

5-11 Data Logger Function

Remark : Please do the following , then execution data logger function.
1. First connect the mains adaptor, with no batteries installed.
2. Check that the unit power on.
3. then install the batteries, as a backup in case there is a power
failure during data logging.
4. After installing the battery, remove the adaptor and confirm that the
meter action is normal after installing the battery. If no problem,
connect the adaptor to the meter.
5. Then start data logging.
A : Press REC KEY once to start the data record function.
A-1 : If the bottom right shows as " Change Card ", it
indicates the memory space is already full either or the
SD CARD exist some wrong.
A-2 : If the SD CARD is normal, the data logger function
will start to be executed.
V12: 0.0
0.0
V23:
V31: 0.0
P1: -0.000 KW
P2: -0.000 KW
P3: -0.000 KW
PΣ : -0.000 KW
PF1: - 0.00
PFΣ: 0.00
Φ1: - 0.0°
0.000 KWH
WH:
QH: 0.000 KVARH
CP1201
20A
B : The bottom right display will show the recorded data points.
B-1 : Each file can record up to 30,000 data points as
screen 1 when the record points exceed 30,000 points,
system will create a new file automatically. (For example,
WTA01001.XLS will be replaced by WTA01002.XLS)
B-2 : While pressing REC KEY once, the data logger
function will stop to execute, the record points will
disappear on bottom right display as screen 2.
V V1:
V
V2:
V V3:
S1:
S2:
S3:
SΣ:
PF2: -
PFH:
Φ2: -
3Φ4W SEC: 2
0.0 V A1:
0.0 V
A2:
0.0 V A3:
0.000 KVA Q1:
0.000 KVA Q2:
0.000 KVA Q3:
0.000 KVA QΣ:
0.00 PF3:
0.00
0.0° Φ3:
SH:
FREQ:
CT: 1
63
0.00 A
0.00 A
0.00 A
- 0.000 KVAR
- 0.000 KVAR
- 0.000 KVAR
- 0.000 KVAR
- 0.00
- 0.0°
0.000 KVAH
0.0 Hz
Change
PT: 1 Card