The Summary Description Of Keyboard - Lutron Electronics DW-6195 Operation Manual

4-3 The summary description of keyboard

1) POWER KEY ( 3-7, Fig. 1 ) :
Press the key to turn the instrument ON/OFF.
2) 1Φ 3Φ ( phase/wire ) KEY ( 3-2, Fig. 1 ) :
Press the key to select
(1P/2W、1P/3W、3P/3W、3P/4W) measurement
function mode.
3) A ( current ) RANGE KEY ( 3-10, Fig. 1 ) :
Press the key to change the current range quickly.
4) REC KEY ( 3-9, Fig. 1 ) :
The data record key for SD CARD.
5) HOLD KEY ( 3-5, Fig. 1 ) :
Press the key to freeze the display reading.
6) BACKLIGHT KEY ( 3-6, Fig. 1 ) :
Press the key to switch Third-order brightness selection.
7) SETUP KEY ( 3-12, Fig. 1 ) :
Press the key to setup the function before measuring.
8) EXIT KEY ( 3-8, Fig. 1 ) :
Press the key to exit setting screen.
9) SHIFT KEY ( 3-11, Fig. 1 )
Press the key to set the different functions in setting screen.
10)UP (▲) KEY ( 3-3, Fig. 1 ) :
Press the key to move the cursor up in setting screen.
11) DOWN (▼) KEY ( 3-4, Fig. 1 ) :
Press the key to move the cursor down in setting screen.
12)Harmonic Analysis Left Key ( 3-24, Fig. 1 )
13)Harmonic Key ( 3-25, Fig. 1)
14)Harmonic Analysis Right Key ( 3-26 , Fig. 1 )
15)Harmonic Analysis V1,V2,V3, A1,A2,A3
Select Key ( 3-27, Fig. 1 )
16)Harmonic Function Voltage or Current
Input Range Select Key ( 3-28, Fig. 1 )
17)Power Measurement Key ( 3-29, Fig. 1 )
18)Phase Diagram Key ( 3-30, Fig. 1 )
19)Waveform of Voltage and Current Key ( 3-31, Fig. 1)
20)Transient Key ( 3-32, Fig. 1)
15