Table of Contents
Advertisement
1 Overview of Auto-Axcess
1.1 Hardware
Hardware features
Overview
Miller Auto-Axcess E welding systems are precise, digitally controlled and
software-driven. They are provided with Ethernet/IP communication for quick and
easy connection to the ABB IRC5 robot controller.
Miller Auto-Line
Miller® Auto-Line technology allows for any input voltage hook-up (190 – 630 V,
50 or 60 Hz) with no manual jumpers which assures rock-solid, consistent output
on fluctuating primary lines.
Fan-On-Demand
The Fan-On-Demand™ cooling system operates only when needed which reduces
the amount of airborne contaminants pulled through the machine.
Wind Tunnel Technology
The Wind Tunnel Technology™ feature circulates air over components that require
cooling, not over electronic circuitry, which reduces contaminants and improves
reliability in harsh welding environments.
1/4-turn steel connectors
1/4-turn steel connectors allow for faster installation of system and eliminates
thread stripping.
115 VAC duplex receptacle
The 115 VAC duplex receptacle provides 10-amp circuit-breaker-protected auxiliary
power regardless of primary power.
Dual removable lifting eyes
The dual removable lifting eyes are used for moving with overhead lifts.
Removability allows for flat-top feeder or storage on top.
Forklift slots
Forklift slots are slots cut into the frame for forklift transportation.
Small footprint
Miller Auto-Axcess models feature a small footprint, designed to minimize floor
space requirements.
Interface options
Several different wire feeding and operator interface options are available and
configurable to the desired application.
Connections for Ethernet
Two connections for Ethernet are provided to interface with any Auto-Axcess™ E
either directly or via the factory Ethernet network.
Application manual - Miller Ethernet I/P Interface and Weld Editor
3HAC054885-001 Revision: -
© Copyright 2015 ABB. All rights reserved.
1 Overview of Auto-Axcess
1.1 Hardware
Continues on next page
11
Advertisement
Table of Contents
