Weld Editor Interface; About The Weld Editor Interface - ABB RobotWare 6.02 Applications Manual

3 Weld Editor Interface

3.1 About the Weld Editor Interface

Overview
The graphical user interface for the FlexPendant is called the Weld Editor Interface.
The information is presented in widgets, which are small applications available
when starting the application Production Screen on the FlexPendant.
The Weld Editor Interface consists of tabs where the user can process and modify
information such as:
Unlike the regular data editor, it combines seam data and weld data for intuitive
process setup and allows them to be modified at the same time.
The Weld Editor also validates the data based on information from the welder.
The data to edit can be selected either by moving the program pointer to a weld
instruction or by using the last weld and seam data.
Application manual - Miller Ethernet I/P Interface and Weld Editor
3HAC054885-001 Revision: -
• Ignition parameters
• Heat parameters
• Weld parameters
• End parameters
© Copyright 2015 ABB. All rights reserved.
3 Weld Editor Interface
3.1 About the Weld Editor Interface
37