Guarantee And Warranty - Heatscope PURE Original Installation And Instruction Manual

EN
30
ARE, MAINTENANCE AND SERVICE
®
Before cleaning and maintaining your HEATSCOPE , disconnect it from the power supply or, if buried cables are used,
switch it off via the omnipolar switches. Ensure that the unit has cooled down – wait at least 30 minutes after the last use
before you start cleaning it.
All surfaces should be cleaned using a damp cloth only. Never use cleaning products containing alkaline substances
such as sodium hydroxide or soap, surfactants or solvents such as alcohol. Use only a very soft cloth or a brush for the
reflector and the heating elements.
REMOVAL fROM SERVICE / DISPOSAL
When the unit reaches the end of its life, it must be removed from service by a specialist in accordance with the relevant
regulations and steps must be taken to ensure that it cannot be put into use again.
The unit must be disposed of professionally and in an environmentally friendly manner. The relevant legal regulations
must be observed.

GUARANTEE AND WARRANTy

®
The HEATSCOPE is guaranteed for 24 months. The warranty period begins with the date on which the new unit was
purchased. Expendable parts or defects that affect the usability of the unit only slightly are not covered by the guarantee.
When making a guarantee claim, you must provide the original invoice showing the date of purchase and the unit model.