Sears Kenmore 630.13902 Manual page 41

Fault Diagnostics
Drain pump
Water switch
Aqua sensor
Customer fault (error) codes
Some error codes can be seen by customers. Viewing the error code (Display
Failure Memory) chart, the last two columns (under "Customer Failure display")
show error codes seen by customers in the digital display.
columns (under "Customer Service Failure display") show error codes seen in
the error code program. Error code displays are identical – the only difference
being some service error codes (e.g. E:08, E:16) can't be seen by customers.
702_58300000150187_ara_en_a
Digital display

E:23 Coil error
 System check of drain pump motor
coil failed, functional safety error.
 Replace drain pump

E:24 No drain flow possible
 Drain pump is running but unable
to remove the water, drain system
blockage.
 Check for blockage of drain
hose

E:25 Blockage
 Drain pump unable to rotate,
attempts to clear failed.
 Check for debris at drain
pump
Digital display

E:26 Reference cam not detected
 Code not used (no water switch)
Digital display

E:28 Calibration failure
 Aqua sensor failed to calibrate
The first two