Sears Kenmore 630.13902 Manual page 11

OPERATION
 Using sales demo program - Press ">" button to start the sales demo mode
program. The digital display will always show "1:23". Pressing buttons will
turn the corresponding wash cycle light on.
 Exiting sales demo program - Press and hold ">"and Delay buttons, then
turn dishwasher off to exit program. Pressing on/off button during sales
demo program shows how dishwasher resets, but does not reset
dishwasher, turn dishwasher off or exit sales demo program.
Preparing a dishwasher for showroom use
Unlike with traditional dishwashers, do NOT disconnect drain pumps when
using sales demo programs. Dishwasher controls run safety checks – if drain
pumps or heat pumps are disconnected, dishwashers will NOT run.
No disconnections are needed – just add one (1) gallon of water (with a 1/2
capful of bacteria stat) to dishwasher tanks -- do NOT add bleach.. Heat pumps
will run and lights will light when program buttons are pushed. Drain pumps do
not run. It's not necessary to plug drain hoses, but it's a good practice to
prevent any possible water leakage.
Dispenser
Closing and opening dispenser doors
702_58300000150187_ara_en_a
Sales demo program*
Slide door forward and press down firmly until
you hear a click.
Push the button as shown.
Digital
display
P7