Table of Contents
Advertisement
COMPONENTS
Door latch
The door latch is mounted on top of the tank and doesn't contain a microswitch.
It uses a Hall-effect sensor in the door to sense when the door is open or
closed. The Hall-effect sensor is held by two T-10 Torx screws. The door latch
is held by one T-20 Torx screw and two tank tabs.
Water inlet valve
Dishwashers use standard horizontal coil water inlet valves with (Rast 5)
connectors. The valve nestles in the left side of the base and is held into place
with two screws.
When reconnecting the water supply to the water valve, don't overtighten the
elbow fitting.
Using Teflon tape on water fittings can help prevent leaking.
The water valve can be accessed without removing outer door or base
cover. However, removing them will provide easier access.
702_58300000150187_ara_en_a
Hall effect
sensor
Door
latch
Hall effect sensor
Advertisement
Table of Contents
