Sears Kenmore 630.13902 Manual page 39

Fault Diagnostics
Heating (heat pump)
702_58300000150187_ara_en_a
Digital display
 E:08 No load in heat pump
 No water in heat pump
 Check water supply
 E:09 Burn through / safety relay
error
 Power module controlling relay not
switching / stuck closed
 Replace power module
 E:10 Resistance too high
 Heater resistance too high
 Replace heat pump
 E:11 NTC1 / NTC 2 failure
(absolute / symmetry)
 NTC1 to NTC 2 internal check
failed, functional safety error.
 Replace heat pump
 E:12 Heater NTC's comparison
check failed
 Heater NTC's
resistances
 Replace heat pump
 E:13 Water temperature too high
 Boil protect level (75ºC / 167ºF)
exceeded, functional safety error.
 Replace heat pump
have different