Sears Kenmore 630.13902 Manual page 28

Repair
Right side access
The power module is accessible from the right side.
To remove power module
Tools needed: Small blade screwdriver.
1. Two plastic base tabs hold the power module in place. To remove power
module, gently bend tabs until they clear module, move bottom of
module (in toward heat pump) until it clears base and pull module from
base.
Pulling bottom of
power module in
toward heat pump
to remove module.
702_58300000150187_ara_en_a
Power module
Up
Left (front) tab
Up
m CAUTION – 75% of all controls returned
for analysis check out OK. Most control
issues are due to loose connections.
Up
Power module
Viewing from
bottom, inside
Right (rear) tab
Up