Sears Kenmore 630.13902 Manual page 8

OPERATION
Turbo Clean
This feature cleans hard-to-clean dishes in the lower rack, eliminating the need
to soak and scrub them. It typically adds ~ 20 minutes to the chosen wash
program. Water usage goes up somewhat on some wash programs.
Reset ("Cancel – Reset")
To reset, press and hold Start button until display shows "0.01" and wait for the
end of cycle indicator. To reset dishwasher, press Power button to turn it off
after it stops. Turn the dishwasher on – one of the wash cycles lights will flash
showing the dishwasher has been reset.
Follow the same procedure to change a wash cycles – once the dishwasher
has been reset, choose the new wash program.
Control lock ("child lock")
This disables buttons while wash cycles are running. Once a wash cycles has
been started using the Start button, press and hold the China Gentle button (~ 3
seconds) until display shows "CL".
display will show and the button will have no effect. To deactivate the Control
lock feature, press and hold the China Gentle button (~ 3 seconds) until "CL"
disappears from the display.
702_58300000150187_ara_en_a
Anytime a button is pressed, the "CL"