Fault Diagnostics
VI. Fault Diagnostics
VIA. Customer service test program
Entering special program mode (error codes and test program)
To enter special programs, press and hold China Gentle and Fast Wash
buttons, then turn dishwasher on – hold the China Gentle and Fast Wash
buttons until the digital display shows "P0". When "P0" shows on the display,
you're in the 1
Entering error codes program
To start error codes program, press Fast Wash button. To exit special
programs, turn dishwasher off.
Holding the Fast Wash button shows the file where an error code is stored (e.g.
"C:00 C:07"). Releasing the Fast Wash button shows the error code "E:00
E:32") – see next page for error codes.
702_58300000150187_ara_en_a
st
special program (error codes).