Sears Kenmore 630.13902 Manual page 10

OPERATION
All programs are listed for questions about unknown codes or displays
occasionally encountered on dishwashers.
To enter special programs, press and hold China Gentle and Fast Wash
buttons, then turn dishwasher on – hold the China Gentle and Fast Wash
buttons until the digital display shows "P0". When "P0" shows on the display,
you're in the 1
The digital display shows what special program the dishwasher is in.
Special programs
Error codes* /
Customer service test*
High voltage test*
Endurance run+
Not used by service
Not used by service
UL program*
Showroom (sales demo)*
 To scroll through programs, press China Gentle button.
 To start programs shown with "*", press Fast Wash button.
 To exit special programs, turn dishwasher off
 Programs shown with "+" are started with the Start button (don't run these
programs).
 Run only programs shown in bold type (error codes, customer service & sales
demo).
Sales demo (showroom) program
Entering sales demo program
 Entering special programs – Press and hold press and hold China Gentle
and Fast Wash buttons, then turn dishwasher on – hold the China Gentle
and Fast Wash buttons until the digital display shows "P0". When "P0"
shows on the display, you're in the 1
 Selecting sales demo program - Press China Gentle button to scroll to
customer service test program. The digital display will show "P7".
702_58300000150187_ara_en_a
st
special program (error codes).
Functional test+
Digital display
P0
P1
P2
P3
P4
P5
P6
P7
st
special program (error codes).