Vg. Drain Pumps; Vh. Dispensers - Sears Kenmore 630.13902 Manual

Repair
VG. Drain pumps
Tools needed: Phillips screwdriver.
1. Remove toe kick -- section VA.
2. To remove the drain pump, rotate it clockwise and pull it out.
VH. Dispensers
Dispensers can be accessed from the front by removing the outer door.
Tools needed: Small flat blade and T-20 Torx screwdrivers.
To remove dispensers
1. Remove outer door -- section VA.
2. Disconnect wire harnesses and remove cable guide from dispenser.
3. Using a small flat blade screwdriver, push the inner door tabs holding the
dispenser.
4. Open the inner door, grasp both sides of dispenser and carefully push
the dispenser in toward the inside of the inner door.
m
CAUTION: Inner door edges are sharp! Cover door edges and remove
dispenser carefully.
702_58300000150187_ara_en_a