Energy Efficiency - AEG CIB6642ABW User Manual

40 www.aeg.com
Problem
The water in the cavity em‐
bossment does not boil.
The water comes out of the
cavity embossment.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product information for hob according to EU 66/2014
Model identification
Type of hob
Number of cooking zones
Heating technology
Diameter of circular cooking
zones (Ø)
Possible cause
The temperature is too low.
There is to much water in
the cavity embossment.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
CIB6642ABW
CIB6641ABM
Hob inside Freestanding Cooker
4
Induction
Left front
Left rear
Right front
Right rear
Remedy
Set the temperature at least
to 110°C. Refer to "Hints and
Tips" chapter.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re‐
fer to "Activating the True
Fan Cooking PLUS func‐
tion".
21.0 cm
14.0 cm
18.0 cm
18.0 cm