IBO WQ Instruction Manual page 8

WQ, WQF, WQ PRO, FURIATKA, Furia, KRAKEN, BIG, IP, IP INOX,IPC, IPE, IPK,
SWQ, SWQ PRO,CTR, ZWQ, MAGNUM 2900, V370, V550, MWQ, KBFU, WQX
CAUTION Read the instruction manual before use. For safety reasons only
persons knowing precisely the instruction manual may operate the pump.
CAUTION Instruction manual is a basic element of sale and purchase contract.
Failure of the user to comply with recommendations included in the
instruction
manual is a non-compliance with the contract and excludes any claims resulting from
possible breakdown of the machine, being the result of use inconsistent with
recommendations.
APPLICATION:
Pumps which are the subject of this manual are designed for pumping clean and dirty
water. ZWQ, MWQ, WQ pumps can be used in households at emptying cesspools, in
farm, pumping water out of flooded rooms, emptying of swimming pools, etc.
Contaminants in water must not have a diameter larger than acceptable for a given type
of pump (see technical data) and must not be of abrasive nature, like e.g. sand, gravel.
The content of solid elements in water cannot be greater than 10%.
The pump is designed for pumping of water without the solid and abrasive elements.
Pumping of water containing sand will lead to quick wear of the pump and as a
consequence, to a breakdown. In this case repair will be possible only upon
payment.
The pump is not suitable for pumping caustic substances, flammable, with
damaging or explosive properties (e.g. gasoline, nitro, petroleum, etc.), food
products, salt water.
Breakdowns caused by pumping of this type of liquids are not subject to
guarantee repairs.
Maximum temperature of the pumped water is 35 o C.
The pump is not suitable for pumping of water containing excessive quantity of mineral
components causing sedimentation on pumping elements. The use pump under such
conditions will lead to premature wear of working elements. In this case
repair of the pump will be possible only upon payment.
The pump cannot pump water containing oils and petrol derivatives. Operation of the
pump in such water will lead to damages to rubber elements e.g. cable or sealings, and
as a result, to leakage of the pump and engine breakdown. In this case repair of the pump
will be possible only upon payment.
Pumped water must not contain long-fibre contaminants whose longest size is
greater than the maximum diameter of contaminants specified in technical data for a given
type of pump.
8
Instruction manual of submersible pumps