Rear Scroll Removal/Installation - Honda HRX217K6HYA Manual

HRX217HYA • HRX217HZA
2. REAR SCROLL
REMOVAL/INSTALLATION
REMOVAL
1.Remove the variable mower shutter
2.Move the left rear wheel to the highest cutting position.
3.Remove the 4 x 19.8 mm roll pin.
4. Remove the two scroll bolts, washers, collars, and
the scroll.
INSTALLATION
Installation is done in the reverse order of removal.
When installing the scroll, position the rib guide, located on
the top of the scroll, between the belt and the Roto-Stop
cable.
After installation, confirm the rib guide and Roto-Stop cable
are not contacting the drive belt.
VARIABLE MOWING SYSTEM/ MOWER DECK/WHEELS
(P. 12-2).
BOLT, 8 x 28 mm
FLANGE
NUT, 8 mm
DRIVE
BELT
DRIVE BELT
ROLL PIN,
4 x 19.8 mm
HOLDER
ROTO-STOP CABLE
RIB GUIDE
FLANGE BOLT,
6 x 32 mm
SCROLL
COLLAR (2)
SCROLL
CHANNEL
GUIDE
RIB
GUIDE
ROTO-STOP
CABLE
CHANNEL
GUIDE
12-5