Table 30. Status LED indicators and descriptions (continued)
Icon
Description
Memory indicator The indicator turns solid amber if a
PCIe indicator
System health and system ID indicator codes
The system health and system ID indicator is located towards the left control panel of the system for Rear Accessed
configuration and towards the right control panel of the system for Front Accessed configuration.
Figure 113. System health and system ID indicator
114
System diagnostics and indicator codes
Condition
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Corrective action
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see the
Getting help
section.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
Getting help
section.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
Getting help
section.
NOTE:
For more information about the
supported PCIe cards, see the
installation guidelines section.
Expansion card