Installing The System Cover - Dell EMC PowerEdge XR11 Installation And Service Manual

Next steps
Replace the system cover.

Installing the system cover

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Close the system cover release latch.
3. Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
Figure 20. Installing the system cover for Rear Accessed configuration
Installing and removing system components 33