Nibe AirSite GreenMaster-HP 12 Series Installer Manual page 39

Pulling out the cooling module
Cooling module weight
Type
GreenMaster-HP-12
GreenMaster-HP-16
NOTE
Switch off GreenMaster-HP and turn off the
current at the safety breaker.
1 Close the shut-off valves outside the heat pump.
Drain the cooling module(s) according to the instruc-
tions on page 37.
2 ■
XF1 (A)
■
XF3 (B)
■
XF4 (C)
C
D
A
3
GreenMaster-HP
120 kg
125 kg
■
XF5 (D)
■
AA100:XF1 (E)
E
B
4
5
TIP
The cooling module is installed in reverse order.
NOTE
During reinstallation, new O-rings must replace
the existing ones at the connections to Green-
Master-HP (see image).
Chapter 8 | Service and maintenance 39