Table of Contents
Advertisement
9. If the distribution box has previously been disas-
sembled, it must be reassembled in the mountings
by the cooling module. Don't forget to connect the
cables and connectors, including two earth conduct-
ors, which must be installed in the distribution box.
10. Carefully lift on the heat exchanger.
11. Connect the pipes under the heat exchanger and
screw the strainer valve into place, and connect the
water seal and the PVC pipe for the waste water.
14
Chapter 2 |
Delivery and handling
12. Lift on the fan section. Make sure you don't pinch
the cables and connectors.
13. Lift on the filter section.
14. Install the rear inspection cover on the heat ex-
changer section.
15. Screw the connecting brackets holding the various
sections together securely into place.
16. Secure the air hose to the nozzle on the heat ex-
changer and lay the hose in the strainer valve.
GreenMaster-HP
Advertisement
Table of Contents
