Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nibe AHP 10-300
Summary of Contents for Nibe AHP 10-300
- Page 1 Installer manual AHP/AHPS/AHPH Accumulator tank IHB GB 1702-1 431372...
-
Page 3: Table Of Contents
Table of Contents 1 Important information Safety information 2 Delivery and handling Transport Assembly Supplied components Removing the covers 3 Accumulator tank design 4 Pipe connections General System diagram Dimensions and pipe connections Installation alternative 5 Electrical installation Sensors 6 Commissioning and adjusting Filling and venting Start-up and inspection 7 Service... -
Page 4: Important Information
It must be disposed of at a special waste station or dealer who provides this type of modifications are reserved. service. ©NIBE 2016. Improper disposal of the product by the user results in administrative penalties in accordance with current legis- lation. - Page 5 Inspection of the installation Current regulations require the heating installation to be inspected before it is commissioned. The inspection must be carried out by a suitably qualified person. Description Notes Signature Date ✔ Heat pump (page 14) Shut off valves Expansion vessel Safety valve Hot water (page 13)
-
Page 6: Delivery And Handling
2 Delivery and handling Transport Removing the covers AHP/AHPS/AHPH should be transported and stored Front cover vertically in a dry place. However, the AHP/AHPS/AHPH may be carefully laid on its back when being moved into a building. 15 - 40 mm Assembly The accumulator tank may only be installed vertically. -
Page 7: Accumulator Tank Design
3 Accumulator tank design AHPS XL18 XL45 XL13 XL18 XL45 XL46 XL14 XL47 XL19 XL19 AHP/AHPS/AHPH Chapter 3 | Accumulator tank design... - Page 8 Pipe connections AHPH Connection, cold water XL46 Connection, hot water Docking connection, supply line (from heat pump*) Docking connection, return line (to heat pump*) XL13 Connection, supply line (from solar heating sys- tem) XL14 Connection, return line (to solar heating system) XL18 Docking connection, supply line high temperature (from external heat source)
-
Page 9: Pipe Connections
4 Pipe connections General Pipe installation must be carried out in accordance with current norms and directives. Internal support bushes must be fitted, when a plastic or annealed copper pipe is used. The accumulator tank must be fitted with the requisite valves, such as a safety valve, shut-off valve and non-return valve. -
Page 10: System Diagram
System diagram AHP consists of a vessel with accumulated volume. AHP is connected to AHPS / AHPH. AHPS XL18 XL45 AHPS consists of a vessel with a number of connections, which make it possible to dock the accumulator tank to external units. -
Page 11: Dimensions And Pipe Connections
AHPS Dimensions and pipe connections XL13 XL45 XL46 XL14 XL47 XL19 XL18 XL45 XL19 XL18 Connection AHP Connection AHPS XL18 Docking connection, supply line high ext. QM1 Draining valve ext. temperature XL3 Cold water Ø XL19 Docking connection, return line high ext. - Page 12 AHPH XL19 XL46 Connection AHPH XL3 Cold water Ø XL4 Hot water Ø XL8 Docking connection, supply line (from ext. heat pump*) XL9 Docking connection, return line (to ext. heat pump*) XL19 Docking connection, return line high ext. temperature XL46 Docking connection, level 2 *or another external heat source Chapter 4 | Pipe connections...
-
Page 13: Installation Alternative
Extended volume for connecting several solar panels, AHP/AHPS/AHPH can be connected in several different for example. ways, some of which are shown here. Further option information is available at www.nibe.eu and in the respective assembly instructions for the heat sources used. Symbol key... - Page 14 To ground source heat pump/external heat source AHPH can be docked with another heat source, for ex- ample NIBE F1145/1155. To pellet boiler AHPS and AHPH can be docked with another heat source, a pellet boiler for example. Chapter 4 |...
-
Page 15: Electrical Installation
5 Electrical installation NOTE Electrical installation and service must be carried out under the supervision of a qualified electri- cian. Electrical installation and wiring must be carried out in accordance with the stipulations in force. Sensors AHP/AHPS/AHPH can be supplemented with up to two hot water sensors. -
Page 16: Commissioning And Adjusting
6 Commissioning and adjusting Filling and venting Filling the hot water coil (AHPS/AHPH) XL18 1. Open a hot water tap in the house. 2. Fill the hot water coil through the cold water connec- tion (XL3). 3. When the water that comes out of the hot water tap it is no longer mixed with air, the hot water coil is full and the tap can be closed. -
Page 17: Start-Up And Inspection
Start-up and inspection Pressure drop diagram, solar coil Connection, supply line solar heating system (XL13) and connection, return line solar heating system (XL14). AHPS Pressure drop (kPa) 1480 1480 Flow (l/h) Tryckfall Flöde AHP/AHPS/AHPH Chapter 6 | Commissioning and adjusting 1480... -
Page 18: Service
7 Service Service actions Safety valve The hot water coil's externally mounted safety valve sometimes releases a little water after hot water usage. This is because the cold water, which enters the hot water coil, expands when heated causing the pressure to rise and the safety valve to open. -
Page 19: Technical Data
8 Technical data Dimensions and setting-out coordinates AHPS AHP/AHPS/AHPH Chapter 8 | Technical data... - Page 20 AHPH Chapter 8 | Technical data AHP/AHPS/AHPH...
-
Page 21: Technical Specifications
Technical specifications Hot water capacity AHPS/AHPH Tap flow Varmvattenkapacitet VVM310 (litres/minute) Tappflöde (l/m) Ekonomi Normal Ekonomi Normal Volume hot water40 °C (litres) Volym varmvatten (liter) NOTE To achieve the stop temperatures in the diagram above, the charge method "target temp" must be selected. -
Page 22: Energy Labelling
Model AHP 10-300 AHPS 10-300 AHPH 10-300 Heating medium circuit Max pressure in boiler section MPa/bar 0.3/3 Max temperature °C Max heat pump size Pipe connections Hot water – Ø22 Ø22 Cold water – Ø22 Ø22 Docking solar – Ø22 –... -
Page 23: Item Register
9 Item register Item register System diagram, 10 Accumulator tank's design, 7 Assembly, 6 Technical data, 19 Dimensions and setting-out coordinates, 19 Technical Data, 21 Cold and hot water, 13 Technical Data, 21 Commissioning and adjusting, 16 The water heater design Filling and venting, 16 List of components, 8 Pressure drop diagram, solar coil, 17... -
Page 27: Contact Information
Tel: +7 831 419 57 06 E-mail: kuzmin@evan.ru www.nibe-evan.ru NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 Markaryd Tel: +46 (0)433 73 000 E-mail: info@nibe.se www.nibe.se For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu for more information. - Page 28 WS name: -Gemensamt WS version: a310 (working edition) Publish date: 2017-01-16 08:45 NIBE AB Sweden Hannabadsvägen 5 Box 14 SE-285 21 Markaryd info@nibe.se www.nibe.eu 431372...
Need help?
Do you have a question about the AHP 10-300 and is the answer not in the manual?
Questions and answers