Subscribe to Our Youtube Channel
Related Manuals for Nibe AP-AW10
Summary of Contents for Nibe AP-AW10
- Page 1 Operating Manual UK Air / Water Compact Heat Pumps NIBE AP-AW10 We reserve the right to make technical changes. 83050406cUK – Translation of the operating manual...
-
Page 2: Please Read First
Indicates suggestions that help to save energy, raw materials and costs. Reference to other sections of the operating manual. Reference other documents manufacturer. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 3: Table Of Contents
Installation plan version 6 ..........42 ScopE of dElIvERy ..............8 TERmINAl dIAGRAm .............43 INSTAllATIoN ................8 cIRcuIT dIAGRAmS Installation location ..............8 Ap-AW10-6c - Ap-AW10-8c ......... 44 Transport to installation location ........9 Ap-AW10-10c – Ap-AW10-12c ........47 Installation ................10 INSTAllATIoN of ThE AppENdIx vENTIlATIoN ducT ............11 converting from air blower on the right to air blower Ec dEclARATIoN of coNfoRmITy ......50... -
Page 4: Intended Use
Never disconnect the unit from the power sup- ply, unless the unit is being opened. The unit bears the cE mark of conformity. Ec declaration of conformity NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 5: Customer Service
Install the heat pump so that the air blower does not blow in the direction of footpaths. We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 6: Functioning Principle Of Heat Pump System
€ When letting in fresh air, do not leave windows open for an extended period, thus saving energy and reducing your heating costs. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 7: Care Of The Unit
It is a good idea to have a maintenance contract with a specialist company. The company will conduct the required maintenance at regular intervals. We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 8: Qualified Technicians
EN 378. It must also fulfill applicable local regulations. overview “Technical data / scope of delivery”. dimensional drawing and installation plan for respective model. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 9: Transport To Installation Location
If it is not possible to transport the unit to the final installation location using a lifting truck, you can also transport the heat pump using a hand truck. Alpha InnoTec GmbH EPP-Isolationshülle 31.01.2008 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 10: Installation
“Technical data/scope of delivery”, “General unit data” section. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 11: Installation Of The Ventilation Duct
Slightly turn both side panels to the side and remove the side panel by pushing it to the back… We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 12: The Air Duct System 700 (Accessory)
5 screen frames the bottom to the top. To facilitate the process, Example drawing of a mounted air duct system: NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 13: Product Advantages
• light and, therefore, easy to transport • easily interlocking and, therefore, easy to assemble • high-quality design We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 14: Air Ducts Assembly
1 masonry of the house exterior 2 Insert the wall duct in the masonry (1 cm above the finished outer facade) or retrofit (using foam in the masonry): NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 15: Securing The Air Duct Into The Wall Duct
4… We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 16: Screen Frame Assembly
NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 17: Installation / Connection To Heating Circuit
(forward flow), the hot water circuit and the shared inflow (return flow) on the heat pump side with the included shut-off devices and flexible hoses… We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 18: Manometer
2 hose for condensate discharge CautIon! guide the pre-mounted hose in the unit for condensate discharge in the interior of the unit as a siphon. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 19: Hot-Water Tank
To do so, loosen cross-head screw and lift off cover plate… 1 Electrical switch cabinet 2 cross-head screw We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... - Page 20 4 connections for regulator board Install electric connections according to the terminal diagram that applies to your model… Terminal diagram for respective model. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual...
-
Page 21: Rinsing, Filling And Bleeding The System
If aluminium materials are used, which is the case in - adequately dimensioned pressurising is integrated many modern heating systems, a ph value of 8.5 must We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... - Page 22 - ap- of corrosion – and aluminium is attacked without the aW10-10C: presence of oxygen. Therefore, apart from softening the heating fill and additional water, the heating water If unit is closed, open bottom front panel…...
- Page 23 If no further steps follow, install the bottom front panel. Ap-AW10-6c-8c 1 bleed valve proCeed as follows for the ap-aW10-12C: If unit is closed, open bottom front panel… “Transport with a hand truck” loosen the quick-release screws for the lower front panel (= control side), remove lower front panel and set aside…...
- Page 24 2 move the lever on the top of the switching valve from top to right bleed the heating circuit and hot water circuit… Ap-AW10-12c 1 filling and emptying valve during this process, turn the lever of the switching valve used for the hot water circuit counter- clockwise.
-
Page 25: Insulating The Hydraulic Connections
Turning the adjusting knob: – clockwise = increases spread. – counterclockwise = decreases spread. open valves to heating circuit. Reset the heating and heat pump regulator. We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 26: Installation Of The Control Element
NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 27: Installation And Removal Of The Screen
1 pressure lock 2 The round recess over the knob We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 28: Commissioning
Thereafter, remove the snap-in lugs from the opposite side. NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... -
Page 29: Safety Temperature Limiter
1 Electric heating element with safety temperature button 2 Reset button We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 30: Technical Data / Scope Of Delivery
*) depending on components tolerances and flow **) comply with local regulations n.n. = not detectable w.w. = to choice ¹) hot water return ²) hot water flow NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... - Page 31 AP-AW10-6C AP-AW10-8C AP-AW10-10C AP-AW10-12C — ı • ı — — ı • ı — — ı • ı — — ı • ı — • ı — • ı — • ı — • ı — • • • •...
-
Page 32: Performance Curves
AP-AW10-6C Performance curves Qh (kW) Temp„ (°C) Pe (kW) 35°C 1VD 50°C 1VD Temp„ (°C) Temp„ (°C) ∆p (bar) ∆p" “” (m³/h) 823139-a Legende: DE823133L/170408 Legend: UK823133L/170408 “” Volumenstrom Heizwasser Volume flow, heating water “” Temp„ Temperatur Wärmequelle Temperature, heat source Temp„... -
Page 33: Ap-Aw10-8C
Performance curves AP-AW10-8C Qh (kW) Temp„ (°C) Pe (kW) 35°C 1VD 50°C 1VD Temp„ (°C) Temp„ (°C) ∆p (bar) ∆p” “” (m³/h) 823140-a Legende: DE823133L/170408 Legend: UK823133L/170408 “” Volumenstrom Heizwasser Volume flow, heating water “” Temp„ Temperatur Wärmequelle Temperature, heat source Temp„... -
Page 34: Ap-Aw10-10C
AP-AW10-10C Performance curves Qh (kW) Temp„ (°C) Pe (kW) 35°C 1VD 50°C 1VD Temp„ (°C) Temp„ (°C) ∆p (bar) ∆p” “” (m³/h) 823137-a Legende: DE823133L/170408 Legend: UK823133L/170408 “” Volumenstrom Heizwasser Volume flow, heating water “” Temp„ Temperatur Wärmequelle Temperature, heat source Temp„... -
Page 35: Ap-Aw10-12C
Performance curves AP-AW10-12C Qh (kW) Temp„ (°C) Pe (kW) 35°C 1VD 50°C 1VD Temp„ (°C) Temp„ (°C) ∆p (bar) ∆p'' “” (m³/h) 823136-a Legende: DE823133L/170408 Legend: UK823133L/170408 “” Volumenstrom Heizwasser Volume flow, heating water “” Temp„ Temperatur Wärmequelle Temperature, heat source Temp„... -
Page 36: Dimensional Drawings
Tilting measure view E: 1995mm without control element and adjustable feet Attention: included in the scope of delivery 3x flexible hose + 3x ball valve for AP-AW10 6C - AP-AW10-10C: R 1" AG DIN 2999 forAP-AW10-12C: R 5/4" AG DIN 2999... -
Page 37: Installation Plan Version 1
Installation plan version 1 AP-AW10-6C – AP-AW10-12C ≥600 ≥600 ≥2270 Legend: UK819306-1 All dimensions in mm. Item Designation Dim. With finished wall thickness 240 to 320 1330 With finished wall thickness 320 to 400 1250 With finished wall thickness 240 to 320... -
Page 38: Installation Plan Version 2
AP-AW10-6C – AP-AW10-12C Installation plan version 2 ≥600 ≥600 ≥2270 Legend: UK819306-2 All dimensions in mm. Item Designation Dim. With finished wall thickness 240 to 320 1330 With finished wall thickness 320 to 400 1250 With finished wall thickness 240 to 320... -
Page 39: Installation Plan Version 3
Installation plan version 3 AP-AW10-6C – AP-AW10-12C 1280 ≥600 ≥600 ≥2860 Legend: UK819306-3 All dimensions in mm. Item Designation Dim. With finished wall thickness 240 to 320 With finished wall thickness 320 to 400 Legende: 819306 Item Designation Technische Änderungen vorbehalten. -
Page 40: Installation Plan Version 4
AP-AW10-6C – AP-AW10-12C Installation plan version 4 1280 ≥600 ≥600 ≥2860 Legend: UK819306-4 All dimensions in mm. Item Designation Dim. With finished wall thickness 240 to 320 With finished wall thickness 320 to 400 Legende: 819306 Item Designation Technische Änderungen vorbehalten. -
Page 41: Installation Plan Version 5
Installation plan version 5 AP-AW10-6C – AP-AW10-12C 2280 ≥600 ≥600 ≥3860 Legend: UK819306-5 All dimensions in mm. Item Designation Dimension With finished wall thickness 240 to 320 With finished wall thickness 320 to 400 Item Designation Version 5 Accessory: wall duct 800x800x420... -
Page 42: Installation Plan Version 6
AP-AW10-6C – AP-AW10-12C Installation plan version 6 2280 ≥600 ≥600 ≥3860 Legend: UK819306-6 All dimensions in mm. Item Designation Dim. With finished wall thickness 240 to 320 With finished wall thickness 320 to 400 Item Designation Legende: 819306 Version 6 Accessory: wall duct 800x800x420 Technische Änderungen vorbehalten. -
Page 43: Terminal Diagram
Terminal diagram AP-AW10-6C – AP-AW10-12C 3~N/PE/400V/50Hz 3~N/PE/400V/50Hz 3~/PE/400V/50Hz 1~N/PE/230V/50Hz B10 A ZW2/SST We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... -
Page 44: Ap-Aw10-6C - Ap-Aw10-8C
AP-AW10-6C - AP-AW10-8C Circuit diagram 1/3 NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual... - Page 45 Circuit diagram 2/3 AP-AW10-6C - AP-AW10-8C We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10...
- Page 46 AP-AW10-6C - AP-AW10-8C Circuit diagram 3/3 yellow white Green Brown NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual...
-
Page 47: Ap-Aw10-10C - Ap-Aw10-12C
Circuit diagram 1/3 AP-AW10-10C – AP-AW10-12C We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10... - Page 48 AP-AW10-10C – AP-AW10-12C Circuit diagram 2/3 NIBE AP-AW10 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual...
- Page 49 Circuit diagram 3/3 AP-AW10-10C – AP-AW10-12C yellow white Green Brown We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10...
-
Page 50: Ec Declaration Of Conformity
In the event of modification of the device(s) without our approval, this declaration shall become invalid. Designation of the device(s) Heat Pump Unit model Number Unit model Number AP-BW30-37* 065285 (106614 02) AP-AW10-6C 064118 (106440 46) AP-BW30-45* 065286 (106615 02) AP-AW10-8C 064119 (106441 46) AP-BW30-58* 065288 (106616 02) AP-AW10-10C 064120 (106442 46) - Page 51 We reserve the right to make technical changes 83050406cUK – Translation of the operating manual NIBE AP-AW10...
- Page 52 Puh: 09-274 697 0 Fax: 09-274 697 40 E-mail: info@nibe. www.nibe.fi AIT France, 10 rue des Moines, 67500 Haguenau Tel : 03 88 06 24 10 Fax : 03 88 06 90 15 E-mail: info@nibe.fr www.nibe.fr NIBE Energy Systems Ltd, 3C Broom Business Park, Bridge Way, Chester eld S41 9QG Tel: 0845 095 1200 Fax: 0845 095 1201 E-mail: info@nibe.co.uk www.nibe.co.uk...
Need help?
Do you have a question about the AP-AW10 and is the answer not in the manual?
Questions and answers