Before Beginning The Installation; After The Installation - Directed Electronics Automate AM5 Installation Manual

➤ Before beginning the installation

• Check with the customer to determine the integrated LED/Valet
switch location
• Remove the domelight fuse or turn off the courtesy lights to prevent
the battery from dying
• Roll down a window to avoid being locked out of the car

➤ After the installation

• Test all functions. The Using Your System section of the Owner's
Guide is very helpful when testing.
• When testing, remember this system is equipped with Nuisance
Prevention® Circuitry. NPC™ can bypass both instant trigger
zones and make them seem to have stop working.
• Carefully reassemble the underdash trim panels.
• Inspect the engine compartment for tools that may have been left
behind.
© 2008 Directed Electronics All rights reserved.
7