Master Dealer Remotes - Directed Electronics Automate AM5 Installation Manual

Master dealer remotes

To program the Master Dealer Remote to the Security System:
1. Open a door.
2. Turn the key to the On position.
3. Within 5 seconds, press and release the integrated LED/Valet switch
the number of times as described in the Transmitter Programming
Grid shown below, and then Press the switch one time and HOLD it
The LED flashes and the horn honks (if connected) to confirm the
selected step. Do not release the integrated LED/Valet switch.
While holding the integrated LED/Valet switch, press the
button on the transmitter you are programming.The vehicle's horn
honks to indicate successful programming.
Note: It is not possible to teach a transmitter button to the system
more than one time. Up to 4 transmitters can be learned to your
Security System.
4. Release. Once the transmitter is learned, the integrated LED/Valet
switch can be released.
Step No.
1
2-7
8
42
Transmitter programming table
Auto learn standard configuration
No function for dealer master remote
Delete all transmitters
Function
© 2008 Directed Electronics All rights reserved.
�������
Wire Color
NA
NA
N/A