Trianco Aztec Mini Installation & Operation Manual page 8

USER INSTRUCTIONS
In Standby Mode
Setting Day of Week
Press "Mode" Four times – Day of Week Flashes, Use "UP" or "DOWN" to set current Day Number
1 – 7 Press "Confirm" to store.
Setting Time
Press "Mode" Twice – Hours Flashes, Use "UP" or "DOWN" to set current time.
Press "Confirm" to store.
Press "Mode" Three times – Minutes Flashes, Use "UP" or "DOWN" to set current time.
Press "Confirm" to store.
In Run Mode
Pressing "Time" will cycle between Manual ON/OFF and Timed.
Programmed times must be set using the WiFi thermostat, see separate instructions supplied with the
thermostat.
Restore to Factory Settings
Press "MODE" for 5 Seconds, When the buzzer sounds Factory settings have been restored
Child Lock
Press "CONFIRM" for 3 Seconds, all keys are locked until "CONFIRM" is pressed again for 3 seconds
Frost Protection
In Standby the boiler will monitor the real time water temperature.
<
If the water temperature is 5°C the boiler will run automatically until the water temperature has reached
15°C. The heating element will turn off, the pump will continue to run for 5 Minutes.
Cleaning Casings
Use hot soapy water applied with a damp cloth for the enamel, then dry with a soft dry cloth.
Simple Maintenance
Ensure that the natural ventilation around the boiler is not obstructed. If fitted in a compartment, ensure all
ventilation grilles are clear.
8