Calculate:limit:state <1|0|On|Off; Calculate:limit:alarm <Display|Beeper|All - ITech IT5101 Programming Manual

Arguments
5
CALCulate:LIMit:STATe <1|0|ON|OFF>
This command is used to set or query comparer.
Command syntax
CALCulate:LIMit:STATe <1|0|ON|OFF>
Query syntax
CALCulate:LIMit:STATe?
Arguments
1|0|ON|OFF
Example
CALCulate:LIMit:STATe ON
Query command
CALCulate:LIMit:STATe?
Arguments
ON
CALCulate:LIMit:ALARm <DISPlay|BEEPer|ALL>
This command is used to set or query the comparer alarm.
Command syntax
CALCulate:LIMit:ALARm <DISPlay|BEEPer|ALL>
Query syntax
CALCulate:LIMit:ALARm?
Arguments
DISPlay|BEEPer|ALL
Example
CALCulate:LIMit:ALARm DISPlay
Query command
CALCulate:LIMit:ALARm?
Arguments
DISPlay
Copyright© Itech Electronic
Configuration Commands
Co., Ltd.
24