Chapter2 System Command; System:beeper :State <1|0|On|Off; System:lfrequency <50|60 - ITech IT5101 Programming Manual

SYSTem:BEEPer :STATe <1|0|ON|OFF>
This command is used to turn on/turn off the beeper, when the arguments is set
to 1/ON, the beeper is enabled and press keyboard will beeper, otherwise, it is
mute.
Command syntax
SYSTem:BEEPer:STATe <1|0|ON|OFF>
Query syntax
SYSTem:BEEPer:STATe?
Arguments
1|0|ON|OFF
Example
SYSTem:BEEPer:STATe ON
Query command
SYSTem:BEEPer:STATe?
Arguments
ON
SYSTem:LFRequency <50|60>
This command is used to set and query the frequency of AC power.
Command syntax
SYSTem:LFRequency <50|60>
Query syntax
SYSTem:LFRequency?
Arguments
50|60
Example
SYSTem:LFRequency 50
Query command
SYSTem:LFRequency?

Chapter2 System Command

Copyright© Itech Electronic
Co., Ltd.
System Command
10