Wai; Cls; Ese <0-255 - ITech IT5101 Programming Manual

*WAI

This command instructs the
further commands until all pending operations are completed. Pending
operations are as defined under the *OPC command.*WAI can be aborted only
by sending the
Command syntax
*WAI
Arguments
NONE
Related Command
*OPC

*CLS

This command clears the following registers：



Command syntax
*CLS
Arguments
NONE
*ESE <0-255>
This command can set the parameter of standard event enable register.
Command syntax
*ESE <0-255>
Query syntax
*ESE?
Arguments
0～255
Example
*ESE 100
Query command
*ESE?
internal resistance tester
Standard event register
Query event register
Status byte register
Copyright© Itech Electronic
internal resistance tester
a device clear command.
Co., Ltd.
IEEE-488 Commands
not to process any
37