System:header <1|0|On|Off; System:error <Asynchronous|Synchronous; System:terminator <0|1 - ITech IT5101 Programming Manual

Command syntax
SYSTem:BACKup
Query syntax
SYSTem:BACKup?
Arguments
NONE
SYSTem:HEADer <1|0|ON|OFF>
This command is used to set or query the infoheader.
Command syntax
SYSTem:HEADer <1|0|ON|OFF>
Query syntax
SYSTem:HEADer?
Arguments
1|0|ON|OFF
SYSTem:ERRor <ASYNchronous|SYNChronous>
This command is used to set or query error timing.
Command syntax
SYSTem:ERRor <ASYNchronous|SYNChronous>
Query syntax
SYSTem:ERRor?
Arguments
ASYNchronous|SYNChronous
SYSTem:TERMinator <0|1>
This command is used to set or query terminator.
Command syntax
SYSTem:TERMinator
Query syntax
SYSTem:TERMinator?
Arguments
0|1
Copyright© Itech Electronic
Co., Ltd.
System Command
13