THORLABS PM100USB Operation Manual page 31

7.1.2.3.5 INPut subsystem commands
Command
INPut
[:PDIode]
:FILTer
[:LPASs]
[STATe] {OFF|0|ON|1}
[STATe]?
:THERmopile
:ACCelerator
[STATe] {OFF|0|ON|1}
[STATe]?
:AUTO {OFF|0|ON|1}?
:TAU {MINimum|MAXimum|DEFault|
<numeric_value>[s]}
:TAU? [{MINimum|MAXimum|DEFault}]
:ADAPter
[:TYPE] {PHOTodiode|THERmal|PYRo}
[:TYPE]?
© 2020 Thorlabs
Description
Sets the bandwidth of the photodiode input stage
Queries the bandwidth of the photodiode input stage
Sets the thermopile accelerator state
Queries the thermopile accelerator state
Sets the thermopile accelerator to auto mode
Queries thermopile accelerator auto mode
Sets thermopile time constant 0-63% in s
Queries the thermopile time constant in s
Sets default sensor adapter type
Queries default sensor adapter type
7 Computer Interface
29