THORLABS PM100USB Operation Manual page 30

PM100USB
Command
[UPPer]?
LOWer?
POWer[:DC]
RANGe
AUTO {OFF|0|ON|1}
AUTO?
[:UPPer] {MINmum|MAXimum|
<numeric_valuje>[W]}
[:UPPer]? [{MINimum|
MAXimum}]
REFerence {MINimum|
MAXimum|DEFault|
<numeric_value>[W]}
REFerence? [{MINimum|
MAXimum|DEFault}]
STATe {OFF|0|ON|1}
STATe?
UNIT {W|DBM}
UNIT?
VOLTage[:DC]
RANGe
AUTO {OFF|0|ON|1}
AUTO?
[:UPPer] {MINmum|MAXimum|
<numeric_valuje>[V]}
[:UPPer]? [{MINimum|
MAXimum}]
REFerence {MINimum|
MAXimum|DEFault|
<numeric_value>[V]}
REFerence? [{MINimum|
MAXimum|DEFault}]
STATe {OFF|0|ON|1}
STATe?
PEAKdetector *)
[:THReshold] {MINimum|
MAXimum|DEFault|
<numeric_value>
[:THReshold]? [{MINimum|
MAXimum|DEFault}
*) Commands for PM100D, PM100USB and PM200 only
28
Description
Queries the frequency range
Switches the auto-ranging function on and off
Queries the auto-ranging function state
Sets the power range in W
Queries the power range
Sets a delta reference value in W
Queries the delta reference value
Switches to delta mode
Queries the delta mode state
Sets the power unit W or dBm
Queries the power unit
Switches the auto-ranging function on and off
Queries the auto-ranging function state
Sets the current range in V
Queries the current range
Sets a delta reference value in V
Queries the delta reference value
Switches to delta mode
Queries the delta mode state
Sets the trigger level in % for the energy mode
Queries the trigger level setting
© 2020 Thorlabs